Explore the Crank Protection Kit - Bolt
  • Crank Protection Kit - Bolt
  • Crank Protection Kit - Bolt
  • Crank Protection Kit - Bolt
  • Crank Protection Kit - Bolt
Crank Protection Kit - Bolt
Crank Protection Kit - Bolt
Crank Protection Kit - Bolt
Crank Protection Kit - Bolt
  • fits most bikes
  • ultra-tough cube-tec protection
  • weatherproof 3m self-adhesive backing

Crank Protection Kit - Bolt

SKU Code: 20316
$8.00 ($19.99)

It’s not just your frame that’s needs protecting! Your bike’s cranks are susceptible to constant rubbing as you pedal. Our Crank Protection Kit features innovative Muc-Off Cube-Tec technology, which helps to prevent scuffs and scratches. Read more

  • easy to install
  • protects against scratches & scuffs
  • Free US Shipping over $50
    Free US Shipping over $50
  • Pay in 4 with Shop Pay
    Pay in 4 with Shop Pay

Pairs great with:

SEE IT IN ACTION

To keep your steed looking factory fresh whatever the conditions, you need a layer of battle-ready protection. Our Frame Protection Kits offer a combination of strength and durability to protect against potential scratches, scuffs and stone chips.

HIGHLIGHTS

  • Backed with ultra-strong 3M self-adhesive
  • Universally designed to fit most MTBs and EMTBs
  • Ultra-tough Cube-Tec material to withstand the gnarliest of impacts

  • Description

    Crank rub on your pride and joy? Hell no!

    It doesn’t take much to scuff your cranks. Trust us, we know! Cranks are susceptible to constant rubbing as you pedal, especially as you change position on the bike.

    Designed for MTB and EMTBs, our Crank Protection Kits have been developed from the ground up and feature the new proprietary Muc-Off Cube-Tec material, forming a barrier around your crank that’s strong enough to withstand the gnarliest of impacts, whilst being flexible enough to fit pretty much any frame geometry.

    The two pieces contained within the kits are backed with ultra-strong 3M self-adhesive backing, which means they’re super easy to install and will stay firmly in place whatever the conditions – So you can focus on keeping it pinned!

    3M™ is a registered trademark.

  • FEATURES

    • Easy to apply: Simply peel off and install!
    • Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks
    • Durable, weatherproof 3M adhesive
    • 2-piece pack is designed to fit most cranks across DH/ENDURO/TRAIL and E-MTBs
    • Caters for cranks 28-50mm in width and up to 140mm in length

  • HOW TO

    1. Clean your bike thoroughly before application. For best results and optimum durability spray Muc-Off Disc Brake Cleaner or Dry Degreaser onto a clean, dry microfibre cloth and wipe over the surface to ensure it is contaminant free. (Always test the disc brake/dry degreaser cleaner on a small inconspicuous area prior to use to ensure finish compatibility!) 
    2. Try to fit the guards in a clean and warm environment, this will help achieve good adhesion to the surface. Top Tip! If you are applying in colder conditions and have access to a hairdryer, then carefully warm the surface. This will help achieve an optimal adhesive bond. 
    3. Peel the guards off the backing material and line up the centre of the guards to the area you are applying. NB: It’s important you start with each sticker in the dead centre of the area you are applying so chill and take your time on this section! Then slowly rub down the middle, working your way out to the sides pushing out any air bubbles to the edges. Top Tip! You can easily trim the shapes as required, if necessary, with clean, sharp scissors if you need to fit around any challenging shapes or frame mounts etc. 
    4. Use a clean microfibre cloth to firmly rub down the guards onto the surface and make sure you cover all areas with even pressure. 
    5. Sit back and admire your freshly wrapped pride and joy, now go ride.

    REMOVAL: Ready to switch up your graphics? Removal is easy! 

    1. Start by gently heating the surface of the stickers with a hairdryer. This will help soften the adhesive, then slowly start peeling up a corner of the guards and peel back as carefully as you can, try to keep the adhesive attached to the protective layer so it all comes off in one piece. 
    2. Once each protection guard is removed use Muc-Off Glue & Sealant Remover to easily remove any residue before re-installing your new guards! (Always test the Glue & Sealant Remover on a small inconspicuous area prior to use to ensure finish compatibility!). *age restrictions may apply!

  • PROJECT GREEN

    Project Green is our never-ending commitment to deliver a multitude of environmentally-focussed improvements across our business. We love the planet we ride on, it’s our playground, and we’re driven to protect it for everyone.

    This product has a Project Green credential; meaning that it’s either biodegradable, refillable, reusable, or all three!

    What are this products Project Green credentials?

    This product is packaged with easily recyclable cardboard packaging, as well as helping to extend the life of your bike by protecting the metalwork. No scratches & scuffs = keeps your bike looking brand-new for longer.

  • Frequently Asked Questions

    What if the sticker doesn’t fit the area or component I am fitting it to perfectly?

    The stickers can be easily trimmed down to size with scissors and we’ve even designed the stickers with set trimming indent slots to help facilitate with this in areas we think may need to be adapted for the perfect fit.

    What if I apply the protection stickers incorrectly or not straight?

    Don’t worry, stay calm, then very carefully and slowly peel the stickers back. If you have access to a hair dryer try and apply some heat to the area as this will help soften the adhesive and allow re-positioning of the sticker.  When applying the clear stickers, using water to help apply these will also allow easy repositioning when fitting.

    Will the frame protection kits fit a road or gravel bike?

    We have designed the frame protection kits to provide coverage on MTB and EMTB bikes meaning that they are too wide for road and gravel bikes.

    Can I use a pressure washer to clean my bike after applying the frame protection stickers? 

    It is safe to use a bike specific pressure washer like ours, however do not point the pressure washer nozzle close up and directly towards the edge of the protective sticker.

    Can I clean my bike with Bike Cleaner after applying the frame protection?

    Yes but we recommend leaving them for at least 24 hours before getting any cleaner or water on them so the adhesive has time to achieve  an optimal adhesive bond to the surface.

    Do I have to use water and a squeegee to apply the clear gloss and clear matt protection stickers?

    Yes we recommend using water to apply these stickers to achieve the best clarity under the stickers. This method helps push out all air bubbles and imperfections so you are left with a crispy clear finish.

  • What's Included

    • 2-piece pack is designed to fit most cranks

  • Reviews

    Trustpilot

  • It's not going anywhere

    Backed with ultra-strong 3M self-adhesive backing for ultimate durability against the elements

  • GET COMPLETELY COVERED

    Get the full Bike Protection Series so you can bomb it knowing your steed is safe